Sprawy

Kontakty

Kontakty: Mr. Derek.Cheng

Tel: 86-592-5536328

Faks: 86-592-5536328

Skontaktuj się teraz

Napisz do nas

Inspection standards for silicone buttons.

2026-02-03

The required temperature for silicone buttons is generally controlled between -15 ℃ and+80 ℃, and the storage temperature should also be between -30 ℃ and+85 ℃. The storage time should also be one week. In addition, if the button is not pressed, it needs to be placed flat for long-term storage, but it can only be stored for about a month under compression. The humidity in the working environment should also be maintained between 45% and 95%, the working pressure should be between 86 and 106Kpa, and the contact rebound rate should be less than 12 milliseconds. The insulation resistance of silicone buttons needs to be greater than 1012 ohms/500VDC, and its breakdown voltage is usually greater than 25KV/mm. In addition, from the appearance, we can find that silicone products should be a delicate and uniform paste or present a viscous liquid. The drying time is generally within 10-30 minutes.

Xiamen Juguangli Import & Export Co., Ltd

produkty

Szybkie linki

profil firmy Wycieczka po fabryce Kontrola jakości Nowości Sprawy Sitemap Polityka prywatności

Nowości

Sprawy

Inspection standards for silicone buttons.

Klawiatury z gumy silikonowej

Klawiatury z gumy przewodzącej

Gumowe O-ringi

Części z gumy silikonowej

Uszczelka z gumy silikonowej

Rękaw z gumy silikonowej

Przelotka z gumy silikonowej